The COBRA 300-H offers the power of 300 psi and 212º F instant heat at the wand tip. The combination of high heat and pressure
dramatically improves cleaning effectiveness. The internal heat exchanger heats the solution after the pump prolonging pump life.
It also maintains the solution at 212º F consistently throughout the job increasing cleaning performance. Select 300 or 75 psi for
carpet, fabric, and upholstery cleaning. The COBRA 300-H offers solid state circuitry, including the patented circuit locator to
prevent blown circuits. Its low moisture system helps carpets dry faster by not flooding the carpet with solution. Its compact design,
9 gallon solution/recovery tank capacity and light weight make the COBRA 300-H easy to maneuver and transport. The tanks are
rotationally molded for long life and carry a lifetime warranty.
Cobra H
The COBRA -H provides exceptional value in a hot water carpet extractor. At 100 psi and 212º F instant heat, the COBRA -H can tackle
the toughest cleaning jobs on carpet or upholstery. It features advanced solid state circuitry, allowing the internal heat exchanger
to maintain 212º F cleaning solution at the tip for superior cleaning and to monitor the smart circuit locator, which prevents blown
circuits. The low moisture system improves carpet drying times. The dual two-stage vacuums, with patented manifold system, give
powerful performance with 150” of lift while also prolonging vacuum motor life. The COBRA -H is lightweight and has 9 gallon solution
and recovery tanks.
Cobra C
The COBRA -C is a 100 psi non-heated model offering excellent performance in a compact design. It features dual two-stage vacuums
with a patented manifold system which prolongs the vacuum motor life and develops 150” of waterlift. That coupled with the low
moisture system helps carpets dry faster. The body is rotationally molded and will not rust, crack or dent. The COBRA -C offers 9
gallon solution and recovery capacity and weighs only 69 lbs.
US Products Features
- Smart Circuit Locator — Automatically locates separate lines to eliminate blown circuits.
- Heater Element — In-line, after the pump for longer life and instant heat to 212º F, lifetime warranty.
- Solid State Circuitry — Senses temperature change in heat exchanger within 1 degree for more consistent heat at the tip.
- Low Moisture System — Less water (combined with higher heat) means faster drying, less chance of shrinkage, and less wicking from the pad.
- Vacuum Manifold — Increases efficiency when using two vacuum motors in series.
- Tanks and Bodies — Lightweight, rotationally molded with lifetime warranty against cracks, leaks, and dents.
Standard Cobra Series Features
- Dimensions: 34”H x 17”W x 26”L
- 9 Gallon Solution and Recovery Tanks
- All Models Available With Auto-Fill
- Available in 120V and 220/240V VAC, 50/60 Hz
- Cord Wrap
- Large Non-Marking Wheels
- Two Handles For Easy Maneuverability and Loading
- WARRANTY: Lifetime on Tank And Body, Lifetime on Heater Element, 1 Year Parts and Labor
Standard Features on Heated Models
- Smart Circuit Locator
- Solid State Circuitry
- Low Moisture System
- 15’ High Pressure Solution Line and Crushproof Vacuum Hose
- Cords: 2 each 25’ 12/3 Gauge, Hospital Grade Plugs
Standard Features on NON-Heated Models
- 15’ Low Pressure Solution Line and Crushproof Vacuum Hose
- Single Cord: 25’ 12/3 Gauge, Hospital Grade Plug.
| MODELS | | -H | -C |
| VACUUM | | Dual 2-stage | Dual 2-stage |
| VAC SHUTOFF | | Ball Float | Ball Float |
| PUMP | |
Demand pump,
100 psi | Demand pump,
100 psi |
| WATERLIFT | | 150” | 150” |
| HEAT | | Instant 212º F | N/A |
| HEATER | | 2000 Watts | N/A |
| WAND | |
| WEIGHT | | 75 lbs. | 69 lbs. |
